ISO 9198:2020 PDF

Paper, board and pulp — Determination of water-soluble sulfates

Открыть превью (PDF)

Название (английский):

ISO 9198:2020

Paper, board and pulp — Determination of water-soluble sulfates

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 18 сентября 2020 г.
Издание:: ISO IS 9198 edition 3 version 1
ICS:: 85.040

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

This document specifies a method for the determination of water-soluble sulfates in all types of pulp, paper and board. The lower limit of the determination is 20 mg of sulfate ion per kilogram of dry sample.

Технические детали

Технический комитет: ISO/TC 6 - Paper, board and pulps
SKU: ISO 9198:2020

Abstract

Overview

ISO 9198:2020 - Paper, board and pulp: Determination of water‑soluble sulfates - specifies a laboratory method to quantify water‑soluble sulfate ions extracted from all types of pulp, paper and board. The method uses aqueous extraction at 23 °C, followed by ion chromatography to determine sulfate concentration. The stated lower limit of determination is 20 mg SO4²⁻ per kg dry sample.

Key topics and technical requirements

Scope: Applies to all pulp, paper and board types; intended for water‑soluble sulfates extracted under defined conditions.
Extraction: Test portion disintegrated in 250 ml water at 23 °C ± 2 °C, soaked for about 2 hours; aliquot withdrawn for analysis.
Analysis method: Ion chromatography with a conductivity detector; calibration with a series of standard solutions (example range 1–10 mg/L) and daily calibration checks.
Apparatus & reagents:
- Wet disintegrator (high‑speed mixer)
- Ion chromatograph with known injector loop and suitable column
- Syringe with ~0.2 µm filter or tea strainer/medium filter paper to prevent fibre carryover
- Distilled/deionized water (conductivity

Overview

Key topics and technical requirements

Scope: Applies to all pulp, paper and board types; intended for water‑soluble sulfates extracted under defined conditions.
Extraction: Test portion disintegrated in 250 ml water at 23 °C ± 2 °C, soaked for about 2 hours; aliquot withdrawn for analysis.
Analysis method: Ion chromatography with a conductivity detector; calibration with a series of standard solutions (example range 1–10 mg/L) and daily calibration checks.
Apparatus & reagents:
- Wet disintegrator (high‑speed mixer)
- Ion chromatograph with known injector loop and suitable column
- Syringe with ~0.2 µm filter or tea strainer/medium filter paper to prevent fibre carryover
- Distilled/deionized water (conductivity

ISO 9198:2020 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Par…

Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machi…

Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods

Rubber — Determination of metal content by atomic absorption spectrometry — Part 2: Determination of lead con…

Optics and photonics — Uncertainty of optical transfer function (OTF) measurement

Refractory materials — Determination of bulk density of granular materials (grain density)

Animal and vegetable fats and oils — Determination of refractive index

Plastics laboratory ware — Disposable serological pipettes