ISO 8503-1:2012 PDF

Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces

Первая страница стандарта ISO 8503-1:2012

Открыть превью (PDF)

Название (английский):

ISO 8503-1:2012

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 8
Дата публикации:: 22 февраля 2012 г.
Издание:: ISO IS 8503 edition 2 version 1
ICS:: 25.220.10

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:120 €

Описание (английский):

ISO 8503-1:2012 specifies the requirements for ISO surface profile comparators, which are intended for visual and tactile comparison of steel substrates which have been blast-cleaned with either shot abrasives or grit abrasives. It also includes definitions of the terms used in the ISO 8503 series and requirements for the care of ISO surface profile comparators.

Технические детали

Технический комитет: ISO/TC 35/SC 12 - Preparation of steel substrates before application of paints and related products
SKU: ISO 8503-1:2012

Abstract

Overview

ISO 8503-1:2012 defines specifications and definitions for ISO surface profile comparators used to assess the surface roughness of blast-cleaned steel substrates. The standard covers the design, marking, calibration and care of planar comparators that represent reference profiles for surfaces cleaned with shot or grit abrasives. ISO 8503-1 is intended for on-site, visual and tactile comparison of abrasive blast-cleaned surfaces before the application of paints and related protective coatings.

Key topics and requirements

ISO surface profile comparator design: comparators are planar plates with four segments, produced as corrosion-resistant positive replicas (e.g., nickel) of blast-cleaned mild steel coupons. They are marked Comparator G (grit) or Comparator S (shot).
Profile nominal values and tolerances (measured by microscope or stylus methods):
- Grit comparators (μm): Segment 1 = 25 ±3; 2 = 60 ±10; 3 = 100 ±15; 4 = 150 ±20
- Shot comparators (μm): Segment 1 = 25 ±3; 2 = 40 ±5; 3 = 70 ±10; 4 = 100 ±15
Profile grading: surfaces are graded as fine, medium or coarse by comparison to the comparator segments (e.g., Fine = segment 1 up to but excluding segment 2).
Calibration and measurement methods: calibration is achieved using methods in ISO 8503-3 (focusing microscope) or ISO 8503-4 (stylus instrument). A comparator is calibrated when measured values fall within the specified nominal values and tolerances.
Documentation and traceability: each comparator must be supplied with a calibration certificate stating the measurement method, estimated tolerance and calibrated values for each segment.
Care and maintenance: Annex A provides requirements for maintenance and re-calibration to ensure reliable tactile/visual assessment.

Applications and users

ISO 8503-1 is practical for:

Coating specifiers and engineers selecting surface preparation and coating systems based on required surface profile.
Quality control / inspectors performing on-site roughness checks before coating application.
Contractors and blast-cleaning operators verifying that abrasive blast-cleaning (shot or grit) meets acceptance criteria.
Comparator manufacturers and calibration laboratories producing, certifying and maintaining reference comparators. Use cases include pre-paint inspections, acceptance testing, field audits and training for visual/tactile profile assessment.

Related standards

ISO 8503-2: Comparator grading procedure (use of comparators)
ISO 8503-3: Calibration via focusing microscope
ISO 8503-4: Calibration via stylus instrument
ISO 8503-5: Replica tape method
ISO 8501, ISO 8502, ISO 8504: complementary standards on visual cleanliness, tests, and surface preparation methods

Keywords: ISO 8503-1, surface profile comparator, blast-cleaned steel, surface roughness, abrasive blast-cleaning, calibration, surface preparation, comparator G, comparator S.

Overview

Key topics and requirements

ISO surface profile comparator design: comparators are planar plates with four segments, produced as corrosion-resistant positive replicas (e.g., nickel) of blast-cleaned mild steel coupons. They are marked Comparator G (grit) or Comparator S (shot).
Profile nominal values and tolerances (measured by microscope or stylus methods):
- Grit comparators (μm): Segment 1 = 25 ±3; 2 = 60 ±10; 3 = 100 ±15; 4 = 150 ±20
- Shot comparators (μm): Segment 1 = 25 ±3; 2 = 40 ±5; 3 = 70 ±10; 4 = 100 ±15
Profile grading: surfaces are graded as fine, medium or coarse by comparison to the comparator segments (e.g., Fine = segment 1 up to but excluding segment 2).
Calibration and measurement methods: calibration is achieved using methods in ISO 8503-3 (focusing microscope) or ISO 8503-4 (stylus instrument). A comparator is calibrated when measured values fall within the specified nominal values and tolerances.
Documentation and traceability: each comparator must be supplied with a calibration certificate stating the measurement method, estimated tolerance and calibrated values for each segment.
Care and maintenance: Annex A provides requirements for maintenance and re-calibration to ensure reliable tactile/visual assessment.

Applications and users

ISO 8503-1 is practical for:

Coating specifiers and engineers selecting surface preparation and coating systems based on required surface profile.
Quality control / inspectors performing on-site roughness checks before coating application.
Contractors and blast-cleaning operators verifying that abrasive blast-cleaning (shot or grit) meets acceptance criteria.
Comparator manufacturers and calibration laboratories producing, certifying and maintaining reference comparators. Use cases include pre-paint inspections, acceptance testing, field audits and training for visual/tactile profile assessment.

Related standards

ISO 8503-2: Comparator grading procedure (use of comparators)
ISO 8503-3: Calibration via focusing microscope
ISO 8503-4: Calibration via stylus instrument
ISO 8503-5: Replica tape method
ISO 8501, ISO 8502, ISO 8504: complementary standards on visual cleanliness, tests, and surface preparation methods

Keywords: ISO 8503-1, surface profile comparator, blast-cleaned steel, surface roughness, abrasive blast-cleaning, calibration, surface preparation, comparator G, comparator S.

ISO 8503-1:2012 PDF

Технические детали

Abstract

Overview

Key topics and requirements

Applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and requirements

Applications and users

Related standards

Похожие стандарты

Preparation of steel substrates before application of paints and related products. Surface roughness characte…

Preparation of steel substrates before application of paints and related products. Surface roughness characte…

Preparation of steel substrates before application of paints and related products — Surface roughness charact…

Preparation of steel substrates before application of paints and related products — Surface roughness charact…

Preparation of steel substrates before application of paints and related products — Visual assessment of surf…

Preparation of steel substrates before application of paints and related products. Tests for the assessment o…

Preparation of steel substrates before application of paints and related products — Surface preparation metho…