ISO 8082-2:2011 PDF

Self-propelled machinery for forestry — Laboratory tests and performance requirements for roll-over protective structures — Part 2: Machines having a rotating platform with a cab and boom on the platform

Первая страница стандарта ISO 8082-2:2011

Открыть превью (PDF)

Название (английский):

ISO 8082-2:2011

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 25
Дата публикации:: 25 ноября 2011 г.
Издание:: ISO IS 8082 edition 1 version 1
ICS:: 65.060.80

Язык документа:

ruen

Срок поставки:5 раб. дн. (перевод)

Цена:375 €

Описание (английский):

ISO 8082-2:2011 establishes a consistent and reproducible means of evaluating the load-carrying characteristics of roll-over protective structures (ROPS) on self-propelled forestry machines under static loading, and gives performance requirements for a representative specimen under such loading. It is applicable to machines configured as forestry machines or defined as such in ISO 6814, having a rotating platform with a cab -- with or without a fixed cab riser -- and boom on the same or a separate platform, intended to be operated by an operator wearing a seat-belt. It is not applicable to forestry machines with elevating cabs.

Технические детали

Технический комитет: ISO/TC 23/SC 15 - Machinery for forestry
SKU: ISO 8082-2:2011

Abstract

Overview

ISO 8082-2:2011 - Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures (ROPS) - Part 2 covers a reproducible, static laboratory test protocol and minimum performance requirements for ROPS fitted to self‑propelled forestry machines that have a rotating platform with a cab and boom. The standard defines how to evaluate load‑carrying characteristics of a representative ROPS specimen (including mounting hardware and rotating platform interface) under controlled static loading. It applies to machines intended to be operated by a seat‑belted operator and excludes machines with elevating cabs.

Key Topics

Scope and applicability: Machines configured as forestry machinery per ISO 6814 with a rotating platform and cab (with or without fixed cab riser), boom on same or separate platform.
Test methods and facilities: Requirements for test rigs, bedplates and mounting replicating the rotating platform interface to ensure consistent test conditions.
Instrumentation: Measurement of applied loads, deflection (Δ), and energy absorption using defined sensors and data capture methods.
Loading procedures: Static loading directions and sequences - lateral, vertical, and longitudinal load application to specified load application points (LAP) using sockets and load distribution devices (LDD).
Geometry and symbols: Definitions for ROPS dimensions (L, W, H), deflection‑limiting volume (DLV), lateral simulated ground plane (LSGP), and locating axis (LA).
Material and temperature requirements: Test material condition and temperature considerations that affect performance.
Performance criteria and reporting: Acceptance criteria for deflection and energy absorption, labelling requirements for compliant ROPS, and standardized test reporting (annexed test report template).

Applications

ISO 8082-2:2011 is used to:

Verify ROPS strength and deformation under static loads during product development.
Certify compliance for manufacturer safety claims and regulatory procurement.
Provide consistent laboratory test procedures for third‑party test houses and certification bodies.
Inform design choices for ROPS, mounting systems, fixed cab risers, and rotating platform interfaces to protect seat‑belted operators in roll‑over events.

Who uses it: forestry machine manufacturers, safety engineers, test laboratories, certification agencies, regulators, and procurement teams specifying safe machinery for forestry operations.

Related Standards

ISO 8082-1 (General machines) - same series for other configurations
ISO 6814 - terminology and classification for forestry machines
ISO 12117-2, ISO 3471 - related ROPS and earth‑moving machinery test methods referenced for comparative procedures
ISO 3164, ISO 3411, ISO 5353 - auxiliary references for operator envelopes, seat index point, and deflection‑limiting volume

Keywords: ISO 8082-2:2011, ROPS, roll-over protective structures, forestry machinery, rotating platform, laboratory tests, performance requirements, static loading.

Overview

Key Topics

Scope and applicability: Machines configured as forestry machinery per ISO 6814 with a rotating platform and cab (with or without fixed cab riser), boom on same or separate platform.
Test methods and facilities: Requirements for test rigs, bedplates and mounting replicating the rotating platform interface to ensure consistent test conditions.
Instrumentation: Measurement of applied loads, deflection (Δ), and energy absorption using defined sensors and data capture methods.
Loading procedures: Static loading directions and sequences - lateral, vertical, and longitudinal load application to specified load application points (LAP) using sockets and load distribution devices (LDD).
Geometry and symbols: Definitions for ROPS dimensions (L, W, H), deflection‑limiting volume (DLV), lateral simulated ground plane (LSGP), and locating axis (LA).
Material and temperature requirements: Test material condition and temperature considerations that affect performance.
Performance criteria and reporting: Acceptance criteria for deflection and energy absorption, labelling requirements for compliant ROPS, and standardized test reporting (annexed test report template).

Applications

ISO 8082-2:2011 is used to:

Verify ROPS strength and deformation under static loads during product development.
Certify compliance for manufacturer safety claims and regulatory procurement.
Provide consistent laboratory test procedures for third‑party test houses and certification bodies.
Inform design choices for ROPS, mounting systems, fixed cab risers, and rotating platform interfaces to protect seat‑belted operators in roll‑over events.

Who uses it: forestry machine manufacturers, safety engineers, test laboratories, certification agencies, regulators, and procurement teams specifying safe machinery for forestry operations.

Related Standards

ISO 8082-1 (General machines) - same series for other configurations
ISO 6814 - terminology and classification for forestry machines
ISO 12117-2, ISO 3471 - related ROPS and earth‑moving machinery test methods referenced for comparative procedures
ISO 3164, ISO 3411, ISO 5353 - auxiliary references for operator envelopes, seat index point, and deflection‑limiting volume

Keywords: ISO 8082-2:2011, ROPS, roll-over protective structures, forestry machinery, rotating platform, laboratory tests, performance requirements, static loading.

ISO 8082-2:2011 PDF

Технические детали

Abstract

Overview

Key Topics

Applications

Related Standards

Похожие стандарты

Abstract

Overview

Key Topics

Applications

Related Standards

Похожие стандарты

Machinery for forestry — Mobile and self-propelled machinery — Identification vocabulary

Self-propelled machinery for forestry — Laboratory tests and performance requirements for roll-over protectiv…

Earth-moving machinery — Laboratory tests and performance requirements for protective structures of excavator…

Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements.

Earth-moving machinery — Laboratory evaluations of roll-over and falling-object protective structures — Speci…

Earth-moving machinery — Human physical dimensions of operators and minimum operator space envelope

Earth-moving machinery, and tractors and machinery for agriculture and forestry. Seat index point