ISO 7203-3:2019 PDF

Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids

Первая страница стандарта ISO 7203-3:2019

Открыть превью (PDF)

Название (английский):

ISO 7203-3:2019

Fire extinguishing media — Foam concentrates — Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 39
Дата публикации:: 1 июля 2019 г.
Издание:: ISO IS 7203 edition 3 version 1
ICS:: 13.220.10

Язык документа:

ruen

Срок поставки:7 раб. дн. (перевод)

Цена:585 €

Описание (английский):

This document specifies the essential properties and performance of liquid foam concentrates used to make low-expansion foams for the control, extinction and inhibition of re-ignition of fires of water-miscible liquids. Minimum performance on certain test fires is specified. These foams are suitable for top application to fires of water-miscible liquids. Those foams that also comply with ISO 7203-1 are also suitable for top application to fires of water-immiscible liquids. The foam concentrates can be suitable for use in non-aspirating sprayers or for subsurface application to liquid fires, but requirements specific to those applications are not included in this document.

Технические детали

Технический комитет: ISO/TC 21/SC 6 - Foam and powder media and firefighting systems using foam and powder
SKU: ISO 7203-3:2019

Abstract

Overview

ISO 7203-3:2019 specifies essential properties and performance requirements for low-expansion foam concentrates intended for top application to fires of water‑miscible liquids. The standard defines what constitutes low-expansion foam (expansion ratio 1–20), sets minimum test‑fire performance, and describes laboratory tests, marking and documentation needed for foam concentrates used in firefighting and industrial fire protection.

Key technical topics and requirements

Scope and application: Focused on low‑expansion foam concentrates for control, extinction and inhibition of re‑ignition on water‑miscible liquids. Foam concentrates that also comply with ISO 7203‑1 are acceptable for water‑immiscible liquids.
Grades and classification: Extinguishing performance graded Class I or II; burn‑back resistance graded levels A, B or C.
Physical and chemical properties: Requirements and tests for viscosity (Newtonian and pseudo‑plastic behavior), pH, sediment (maximum 0.25% by volume before ageing), and tolerance to freezing and thawing.
Foam performance metrics: Definitions and test procedures for expansion, 25% drainage time, and drainage limits. Clause 9 requires averaging results from two expansion/drainage tests.
Test fire performance: Minimum performance on specified test fires is required (detailed in Annex F), including acceptable testing temperature ranges and decision‑tree guidance.
Marking and documentation: Requirements for marking, packaging and a specification sheet listing characteristic values and declared temperature ranges.
Normative and informative annexes: Includes procedures for sampling and conditioning (Annex A), sediment and viscosity determination (Annexes C and D), expansion/drainage testing (Annex E), fire testing (Annex F), compatibility (Annex H), and small‑scale fire tests (Annex I).

Practical applications - who uses this standard

Foam concentrate manufacturers - to design, test and certify products that meet international performance and storage requirements.
Fire protection engineers and consultants - to specify appropriate foam concentrates for industrial, petrochemical, marine and transportation hazards involving water‑miscible liquids.
Testing and certification laboratories - to perform standardized viscosity, sediment, expansion, drainage and fire tests.
Procurement and safety managers - to evaluate product datasheets, marking and compatibility (including sea‑water use) when selecting foam concentrates for fire suppression systems.
Fire brigades and emergency responders - to understand operational limits (temperature, application type) and expected burn‑back resistance.

Related standards

ISO 7203‑1 (top application for water‑immiscible liquids)
ISO 7203‑2 (medium/high‑expansion foam concentrates)
ISO 7076 (foam systems)
Referenced test standards: ISO 3104, ISO 3219, ISO 3310‑1

ISO 7203‑3:2019 is essential reading for anyone specifying or verifying firefighting foam concentrates, ensuring consistent performance, safety and compatibility for suppression of fires involving water‑miscible liquids.

Overview

Key technical topics and requirements

Scope and application: Focused on low‑expansion foam concentrates for control, extinction and inhibition of re‑ignition on water‑miscible liquids. Foam concentrates that also comply with ISO 7203‑1 are acceptable for water‑immiscible liquids.
Grades and classification: Extinguishing performance graded Class I or II; burn‑back resistance graded levels A, B or C.
Physical and chemical properties: Requirements and tests for viscosity (Newtonian and pseudo‑plastic behavior), pH, sediment (maximum 0.25% by volume before ageing), and tolerance to freezing and thawing.
Foam performance metrics: Definitions and test procedures for expansion, 25% drainage time, and drainage limits. Clause 9 requires averaging results from two expansion/drainage tests.
Test fire performance: Minimum performance on specified test fires is required (detailed in Annex F), including acceptable testing temperature ranges and decision‑tree guidance.
Marking and documentation: Requirements for marking, packaging and a specification sheet listing characteristic values and declared temperature ranges.
Normative and informative annexes: Includes procedures for sampling and conditioning (Annex A), sediment and viscosity determination (Annexes C and D), expansion/drainage testing (Annex E), fire testing (Annex F), compatibility (Annex H), and small‑scale fire tests (Annex I).

Practical applications - who uses this standard

Foam concentrate manufacturers - to design, test and certify products that meet international performance and storage requirements.
Fire protection engineers and consultants - to specify appropriate foam concentrates for industrial, petrochemical, marine and transportation hazards involving water‑miscible liquids.
Testing and certification laboratories - to perform standardized viscosity, sediment, expansion, drainage and fire tests.
Procurement and safety managers - to evaluate product datasheets, marking and compatibility (including sea‑water use) when selecting foam concentrates for fire suppression systems.
Fire brigades and emergency responders - to understand operational limits (temperature, application type) and expected burn‑back resistance.

Related standards

ISO 7203‑1 (top application for water‑immiscible liquids)
ISO 7203‑2 (medium/high‑expansion foam concentrates)
ISO 7076 (foam systems)
Referenced test standards: ISO 3104, ISO 3219, ISO 3310‑1

ISO 7203-3:2019 PDF

Технические детали

Abstract

Overview

Key technical topics and requirements

Practical applications - who uses this standard

Related standards

Похожие стандарты

Abstract

Overview

Key technical topics and requirements

Practical applications - who uses this standard

Related standards

Похожие стандарты

Fire extinguishing media — Foam concentrates — Part 1: Specification for low-expansion foam concentrates for…

Fire extinguishing media — Foam concentrates — Part 2: Specification for medium and high expansion foam conce…

Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment

Petroleum products. Transparent and opaque liquids. Determination of kinematic viscosity and calculation of d…

Rheology. General principles of rotational and oscillatory rheometry.

Test sieves — Technical requirements and testing — Part 1: Test sieves of metal wire cloth