ISO 6647-2:2020 PDF

Rice — Determination of amylose content — Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards

Первая страница стандарта ISO 6647-2:2020

Открыть превью (PDF)

Название (английский):

ISO 6647-2:2020

Rice — Determination of amylose content — Part 2: Spectrophotometric routine method without defatting procedure and with calibration from rice standards

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 11
Дата публикации:: 14 июля 2020 г.
Издание:: ISO IS 6647 edition 3 version 1
ICS:: 67.060

Язык документа:

ruen

Срок поставки:2 раб. дн. (перевод)

Цена:165 €

Описание (английский):

This document specifies two simplified routine methods for the determination of the amylose mass fraction of milled rice, non-parboiled. The main difference between the two methods is the dispersion procedure: method A specifies hot dispersion, and method B specifies cold dispersion. Both methods are applicable to rice with an amylose mass fraction higher than 5 %. NOTE These methods describe simplified procedures for the preparation of samples, which are frequently used in routine laboratories. The methods use the same reagents as the reference method (see ISO 6647-1), but omit the defatting step. Rice samples where the amylose mass fraction has been determined by the reference method are used as standards.

Технические детали

Технический комитет: ISO/TC 34/SC 4 - Cereals and pulses
SKU: ISO 6647-2:2020

Abstract

Overview

ISO 6647-2:2020 specifies two simplified, spectrophotometric routine methods for determining the amylose mass fraction of milled, non‑parboiled rice. The standard covers routine laboratory procedures that omit the defatting step used in the reference method (ISO 6647‑1) and instead use calibration from rice standards whose amylose content has been established by the reference method. Two dispersion alternatives are defined: Method A (hot dispersion) and Method B (cold dispersion). Both methods are applicable to rice samples with an amylose mass fraction greater than 5%.

Key topics and technical requirements

Scope and applicability: Routine determination of amylose in milled, non‑parboiled rice (>5% amylose).
Principle: Grind rice to a fine flour, disperse starch in NaOH, react an aliquot with iodine and measure absorbance (typical wavelength 720 nm; 620 nm or 680 nm also acceptable).
Dispersion procedures:
- Method A: hot dispersion - 1 mol/L NaOH and 10 min heating in a boiling water bath.
- Method B: cold dispersion - 2 mol/L NaOH and 10 min high‑speed magnetic stirring.
Sample preparation: Grind to pass 150–180 µm sieve; typical test portion 100 mg; add ethanol to wet sample before alkali dispersion.
Calibration: Use at least four rice standards (or a certified reference material) whose amylose mass fraction was determined independently by ISO 6647‑1; plot absorbance versus amylose mass fraction to create the calibration graph.
Reagents and apparatus: Standard analytical reagents (ethanol, NaOH, acetic acid, iodine solution), spectrophotometer (1 cm cells), grinder, sieve, volumetric glassware. Blank solutions and dual determinations are required.
Results and precision: Report amylose on a dry basis, as the mean of two determinations. The standard includes precision data and interlaboratory results (see Clause 10 and Annex A).

Applications and users

ISO 6647-2:2020 is designed for routine use where timely, reproducible amylose results are needed:

Quality control laboratories in rice milling and processing plants
Cereal and food analysis laboratories performing routine screening
Rice breeding and research facilities monitoring amylose phenotype
Regulatory and trade laboratories requiring standardized methods The method is suited where the defatting step is impractical or time‑consuming and where calibration against rice‑based standards improves comparability with the ISO 6647 reference method.

Related standards

ISO 6647‑1:2020 - Reference spectrophotometric method (with defatting)
ISO 712 - Moisture determination for cereals
ISO 7301 - Rice specification
ISO 8466‑1 - Calibration and statistical evaluation of analytical methods
ISO 24333 - Recommended sampling for rice

Keywords: ISO 6647-2:2020, amylose content, rice amylose determination, spectrophotometric routine method, milled rice, calibration from rice standards, hot dispersion, cold dispersion.

Overview

Key topics and technical requirements

Scope and applicability: Routine determination of amylose in milled, non‑parboiled rice (>5% amylose).
Principle: Grind rice to a fine flour, disperse starch in NaOH, react an aliquot with iodine and measure absorbance (typical wavelength 720 nm; 620 nm or 680 nm also acceptable).
Dispersion procedures:
- Method A: hot dispersion - 1 mol/L NaOH and 10 min heating in a boiling water bath.
- Method B: cold dispersion - 2 mol/L NaOH and 10 min high‑speed magnetic stirring.
Sample preparation: Grind to pass 150–180 µm sieve; typical test portion 100 mg; add ethanol to wet sample before alkali dispersion.
Calibration: Use at least four rice standards (or a certified reference material) whose amylose mass fraction was determined independently by ISO 6647‑1; plot absorbance versus amylose mass fraction to create the calibration graph.
Reagents and apparatus: Standard analytical reagents (ethanol, NaOH, acetic acid, iodine solution), spectrophotometer (1 cm cells), grinder, sieve, volumetric glassware. Blank solutions and dual determinations are required.
Results and precision: Report amylose on a dry basis, as the mean of two determinations. The standard includes precision data and interlaboratory results (see Clause 10 and Annex A).

Applications and users

ISO 6647-2:2020 is designed for routine use where timely, reproducible amylose results are needed:

Quality control laboratories in rice milling and processing plants
Cereal and food analysis laboratories performing routine screening
Rice breeding and research facilities monitoring amylose phenotype
Regulatory and trade laboratories requiring standardized methods The method is suited where the defatting step is impractical or time‑consuming and where calibration against rice‑based standards improves comparability with the ISO 6647 reference method.

Related standards

ISO 6647‑1:2020 - Reference spectrophotometric method (with defatting)
ISO 712 - Moisture determination for cereals
ISO 7301 - Rice specification
ISO 8466‑1 - Calibration and statistical evaluation of analytical methods
ISO 24333 - Recommended sampling for rice

Keywords: ISO 6647-2:2020, amylose content, rice amylose determination, spectrophotometric routine method, milled rice, calibration from rice standards, hot dispersion, cold dispersion.

ISO 6647-2:2020 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Rice — Determination of amylose content — Part 1: Spectrophotometric method with a defatting procedure by met…

Rice. Determination of amylose content - Spectrophotometric method with a defatting procedure by methanol and…

Rice. Determination of amylose content - Reference method

Eggs and egg products — Determination of fipronil and metabolites residues — Liquid chromatography tandem mas…

Rice - Specification (ISO 7301:2021)

Water quality — Calibration and evaluation of analytical methods and estimation of performance characteristic…

Cereals and cereal products — Sampling