ISO 6598:1985 PDF

Fertilizers — Determination of phosphorus content — Quinoline phosphomolybdate gravimetric method

Открыть превью (PDF)

Название (английский):

ISO 6598:1985

Fertilizers — Determination of phosphorus content — Quinoline phosphomolybdate gravimetric method

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 3
Дата публикации:: 19 сентября 1985 г.
Издание:: ISO IS 6598 edition 1 version 1
ICS:: 65.080

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:45 €

Описание (английский):

The method consists in precipitating, after hydrolysis if necessary, of orthophosphate ions in the form of quinoline phosphomolybdate, in an acid medium and in the presence of acetone, at approximately 75 °C, followed by filtrating, washing drying and weighing of the precipitate obtained.

Технические детали

Технический комитет: ISO/TC 134 - Fertilizers, soil conditioners and beneficial substances
SKU: ISO 6598:1985

Abstract

Overview

ISO 6598:1985 specifies a gravimetric method for determining phosphorus content in fertilizers by precipitating orthophosphate as quinoline phosphomolybdate. The procedure - applicable to natural phosphate materials and manufactured fertilizers - includes hydrolysis if non‑orthophosphate forms are present, precipitation in an acidic/acetone medium at about 75 °C, followed by filtration, washing, drying and weighing of the precipitate. Results are reported as percentage of P2O5 (pentoxide of diphosphorus).

Key topics and technical requirements

Principle: Convert orthophosphate to a quinoline phosphomolybdate precipitate; quantify phosphorus gravimetrically.
Hydrolysis: Required when phosphate species other than orthophosphate are present; typically reflux about 1 hour.
Reagents: Analytical‑grade reagents only. The standard specifies prepared solutions (A–E) including molybdate, citric acid, nitric acid and quinoline; acetone is used as solvent.
Apparatus: Common lab equipment plus:
- 500 ml wide‑neck conical flask
- Fritted glass crucible (porosity P10 or P16)
- Oven (250 ± 5 °C), desiccator, and a heating device without an open flame
Procedure highlights:
- Add precipitant solution and heat to near‑boiling (~75–80 °C) rapidly.
- Cool, allow precipitate to settle, decant and filter under vacuum.
- Wash repeatedly, transfer to crucible, dry to constant mass at 250 °C and weigh to 0.0001 g precision.
- Add acetone to filtrate and dilute as specified when preparing reagent blends.
Quality metrics:
- Repeatability: absolute difference between two results (same operator/lab) should be

Overview

Key topics and technical requirements

Principle: Convert orthophosphate to a quinoline phosphomolybdate precipitate; quantify phosphorus gravimetrically.
Hydrolysis: Required when phosphate species other than orthophosphate are present; typically reflux about 1 hour.
Reagents: Analytical‑grade reagents only. The standard specifies prepared solutions (A–E) including molybdate, citric acid, nitric acid and quinoline; acetone is used as solvent.
Apparatus: Common lab equipment plus:
- 500 ml wide‑neck conical flask
- Fritted glass crucible (porosity P10 or P16)
- Oven (250 ± 5 °C), desiccator, and a heating device without an open flame
Procedure highlights:
- Add precipitant solution and heat to near‑boiling (~75–80 °C) rapidly.
- Cool, allow precipitate to settle, decant and filter under vacuum.
- Wash repeatedly, transfer to crucible, dry to constant mass at 250 °C and weigh to 0.0001 g precision.
- Add acetone to filtrate and dilute as specified when preparing reagent blends.
Quality metrics:
- Repeatability: absolute difference between two results (same operator/lab) should be

ISO 6598:1985 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Похожие стандарты

Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings a…

Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 1: Dimension…

Information technology — Telecommunications and information exchange between systems — Near Field Communicati…

Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles

Information and documentation — International standard serial number (ISSN)

Water quality — General guidance on the enumeration of micro-organisms by culture

Alpine ski-bindings — Lateral release under impact loading — Test method

Sodium hydrogen carbonate for industrial use — Determination of sodium carbonate — Titrimetric method