Overview
ISO 30007:2010 - Ships and marine technology - Measures to prevent asbestos emission and exposure during ship recycling - provides practical, risk‑based methods to minimize asbestos release and worker exposure during ship recycling. The standard helps ship recyclers comply with The Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships (2009) and replaces ISO/PAS 30007:2010. Key terms defined include asbestos, ACM (asbestos-containing material), competent person, decontamination zone and HEPA filter.
Key topics and technical requirements
- Work grading (three grades): Tasks are classified into Work Grade 1 (sprayed-on/surface ACMs and thermal insulation requiring strict controls), Work Grade 2 (other engine/thermal insulation and heat-exposed materials), and Work Grade 3 (ACMs in accommodation and service spaces such as linings, gaskets and flooring). The competent person assigns grades and reviews them during operations.
- Preliminary checks and inventory: Competent persons must check ship inventories and related documentation to identify ACM locations before work starts.
- Planning and documentation: A written plan is required covering operational overview, organizational chart, operating schedule, removal procedures, equipment/tools, PPE, wetting agents, decontamination‑zone layout and waste disposal arrangements.
- Asbestos‑monitoring plan: Where national law requires monitoring (air, water, soil), a written monitoring plan specifying methods, locations and responsibilities must be prepared.
- Work procedures and engineering controls: Procedures vary by work grade and include isolation with plastic sheeting, use of negative‑pressure dust collectors, HEPA‑equipped vacuum cleaners, glove bags for small sections and wetting agents to suppress dust.
- Decontamination and PPE: Establishment of decontamination zones (equipment/change room, shower, clean room), use of specified respirators and protective clothing, and records of training and medical checks for workers.
- Waste handling: Waste disposal plans must specify storage, transport and final disposal in accordance with national regulations.
Practical applications - who uses ISO 30007:2010
- Ship recycling yards and facility managers implementing safe dismantling programs
- Environmental and occupational health & safety (EHS) professionals in the maritime sector
- Ship owners preparing inventories to meet the Hong Kong Convention
- Regulators and auditors assessing compliance with asbestos control measures during ship recycling
Benefits
- Reduces environmental release of asbestos fibers and protects workers’ health
- Provides auditable procedures and documentation to meet regulatory and convention requirements
- Clarifies responsibilities for competent persons, training and monitoring
Related standards
- The Hong Kong International Convention for the Safe and Environmentally Sound Recycling of Ships (2009)
- ISO/PAS 30007:2010 (superseded)
- ISO 30006:2010 (inventory of hazardous materials) - referenced for definitions
Keywords: ISO 30007:2010, ship recycling, asbestos control, ACM, HEPA, decontamination zone, Hong Kong Convention, asbestos monitoring, work grades.
Открыть превью (PDF)Ships and marine technology — Measures to prevent asbestos emission and exposure during ship recycling
