ISO 15186-1:2000 PDF

Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements

Первая страница стандарта ISO 15186-1:2000

Открыть превью (PDF)

Название (английский):

ISO 15186-1:2000

Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 2 марта 2000 г.
Издание:: ISO IS 15186 edition 1 version 1
ICS:: 91.120.20

Язык документа:

ruen

Срок поставки:3 раб. дн. (перевод)

Цена:210 €

Описание (английский):

La présente partie de l'ISO 15186 spécifie une méthode d'intensité pour déterminer l'indice d'affaiblissement acoustique et l'isolement acoustique normalisé des éléments de construction. La méthode peut être utilisée comme une alternative à l'ISO 140-3 et à l'ISO 140-10 respectivement. L'utilisation de cette méthode se révèle importante lorsque la méthode traditionnelle de l'ISO 140-3 échoue en raison d'une transmission latérale élevée.La reproductibilité de cette méthode d'intensité est jugée supérieure ou égale à celle de l'ISO 140-3.NOTE Certaines informations relatives à l'exactitude avec laquelle la présente partie de l'ISO 15186 peut reproduire l'indice d'affaiblissement acoustique mesuré conformément à l'ISO 140-3 sont données dans l'annexe A.

Технические детали

Технический комитет: ISO/TC 43/SC 2 - Building acoustics
SKU: ISO 15186-1:2000

Abstract

Overview

ISO 15186-1:2000 specifies a sound intensity method for laboratory measurement of sound insulation of building elements. It defines how to determine the intensity sound reduction index and the intensity element-normalized level difference as an alternative to traditional methods (ISO 140-3 and ISO 140-10). The standard is part of the ISO 15186 series and is intended for laboratory measurements where flanking transmission or small-element geometry can compromise conventional techniques.

Key topics and technical requirements

Scope: Laboratory measurements of sound insulation in buildings and building elements using sound intensity.
Measured quantities: Average sound pressure level in the source room and average normal sound intensity over a measurement surface on the receiving side.
Measurement surface and distance: Use a measurement surface that fully encloses the test specimen (box-, hemispherical- or niche-shaped as applicable). Recommended measurement distance is typically 0.1–0.3 m; avoid distances < 0.1 m to prevent near-field effects.
Instrumentation:
- Intensity instrumentation must measure one-third-octave band intensity levels and comply with IEC 61043 (class 1).
- Pressure-residual intensity index of the probe/analyser should be > 10 dB.
- Sound pressure measurement equipment must meet ISO 140-3 requirements; source-room microphones should have a flat response in diffuse fields.
Calibration and verification:
- Verify IEC 61043 compliance at least annually (or every 2 years if using an intensity calibrator before each series).
- Pre-test checks: warm-up, sound pressure calibration per IEC 60942, residual-intensity testing and (if available) sound-intensity calibrator checks.
Result expressions & corrections:
- Standard defines calculation of intensity-based R_I and D_I,n,e, and a modified intensity index R_I,M using an adaption term K (Annex B) to simulate traditional ISO 140-3 results.
Quality checks: Use the surface pressure–intensity indicator (F) to ensure the field is appropriate (e.g., F ≥ 10 dB for reflecting specimens; ≥ 6 dB when the receiving side is sound-absorbing).

Applications and users

ISO 15186-1 is used by:

Acoustic test laboratories and manufacturers of walls, windows, doors and small building elements
Acoustical consultants validating laboratory sound insulation
Test houses when flanking transmission invalidates ISO 140-3
Standards bodies and specifiers needing an alternative, reproducible laboratory method for sound insulation testing

Practical advantages include reliable measurements for small elements and situations with high flanking transmission, with reproducibility equal to or better than ISO 140-3.

Related standards

ISO 140-1 (laboratory facility requirements)
ISO 140-3 / ISO 140-10 (traditional laboratory methods)
ISO 717-1 (rating/weighting of indices)
ISO 9614-1, IEC 60942, IEC 61043 (instrumentation and calibration)

Keywords: ISO 15186-1, acoustics, sound intensity, sound insulation, laboratory measurements, sound reduction index, element-normalized level difference, measurement surface, intensity probe.

Overview

Key topics and technical requirements

Scope: Laboratory measurements of sound insulation in buildings and building elements using sound intensity.
Measured quantities: Average sound pressure level in the source room and average normal sound intensity over a measurement surface on the receiving side.
Measurement surface and distance: Use a measurement surface that fully encloses the test specimen (box-, hemispherical- or niche-shaped as applicable). Recommended measurement distance is typically 0.1–0.3 m; avoid distances < 0.1 m to prevent near-field effects.
Instrumentation:
- Intensity instrumentation must measure one-third-octave band intensity levels and comply with IEC 61043 (class 1).
- Pressure-residual intensity index of the probe/analyser should be > 10 dB.
- Sound pressure measurement equipment must meet ISO 140-3 requirements; source-room microphones should have a flat response in diffuse fields.
Calibration and verification:
- Verify IEC 61043 compliance at least annually (or every 2 years if using an intensity calibrator before each series).
- Pre-test checks: warm-up, sound pressure calibration per IEC 60942, residual-intensity testing and (if available) sound-intensity calibrator checks.
Result expressions & corrections:
- Standard defines calculation of intensity-based R_I and D_I,n,e, and a modified intensity index R_I,M using an adaption term K (Annex B) to simulate traditional ISO 140-3 results.
Quality checks: Use the surface pressure–intensity indicator (F) to ensure the field is appropriate (e.g., F ≥ 10 dB for reflecting specimens; ≥ 6 dB when the receiving side is sound-absorbing).

Applications and users

ISO 15186-1 is used by:

Acoustic test laboratories and manufacturers of walls, windows, doors and small building elements
Acoustical consultants validating laboratory sound insulation
Test houses when flanking transmission invalidates ISO 140-3
Standards bodies and specifiers needing an alternative, reproducible laboratory method for sound insulation testing

Practical advantages include reliable measurements for small elements and situations with high flanking transmission, with reproducibility equal to or better than ISO 140-3.

Related standards

ISO 140-1 (laboratory facility requirements)
ISO 140-3 / ISO 140-10 (traditional laboratory methods)
ISO 717-1 (rating/weighting of indices)
ISO 9614-1, IEC 60942, IEC 61043 (instrumentation and calibration)

Keywords: ISO 15186-1, acoustics, sound intensity, sound insulation, laboratory measurements, sound reduction index, element-normalized level difference, measurement surface, intensity probe.

ISO 15186-1:2000 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Applications and users

Related standards

Похожие стандарты

Rubber hoses, textile-reinforced, for general-purpose water applications. Specification.

Guidelines for environmental auditing — General principles

Electroacoustics - Sound calibrators

Sustainability information. General principles and requirements for validation and verification.

Acoustics. Rating of sound insulation in buildings and of building elements

Acoustics. Determination of sound power levels of noise sources using sound intensity - Measurement at discre…