ISO 1216:2017 PDF

Boiled reproduction cork — Grading, classification and packing

Открыть превью (PDF)

Название (английский):

ISO 1216:2017

Boiled reproduction cork — Grading, classification and packing

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 4
Дата публикации:: 8 декабря 2017 г.
Издание:: ISO IS 1216 edition 4 version 1
ICS:: 79.100

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:60 €

Описание (английский):

ISO 1216:2017 defines when boiled reproduction cork is considered to be commercially dry. In addition, it classifies the different possibilities of grading boiled reproduction cork in terms of thickness, specifies its visual classification, packing and marking and defines the acceptable loss in transit.

Технические детали

Технический комитет: ISO/TC 87 - Cork
SKU: ISO 1216:2017

Abstract

Overview - ISO 1216:2017 (Boiled reproduction cork)

ISO 1216:2017 specifies requirements for boiled reproduction cork covering when it is considered commercially dry, how it is graded by thickness, its visual classification, packing and marking of bales, and acceptable loss in transit. The standard is intended to ensure consistent measurement, packing and labelling practices for producers, traders and quality inspectors in the cork supply chain.

Key topics and technical requirements

Commercial dryness: cork is considered commercially dry when moisture content ≤ 14% (moisture determined per ISO 2386).
Thickness measurement: thickness (without back) is measured as the average of four measurements taken at the ends of two straight segments passing through the cork centre in the tangential and axial directions. Irregularly thick zones shall not exceed 10% of total area.
Grades by thickness (d in mm):
- Extra thin: 14 < d ≤ 22 (sub‑grades 14–18 and 18–22)
- Thin: 22 < d ≤ 27
- Pint: 27 < d ≤ 32
- Quart: 32 < d ≤ 40
- Thick: 40 < d ≤ 54 (sub‑grades 40–45 and 45–54)
- Extra thick: d > 54
- Note: grouping 27

Overview - ISO 1216:2017 (Boiled reproduction cork)

Key topics and technical requirements

Commercial dryness: cork is considered commercially dry when moisture content ≤ 14% (moisture determined per ISO 2386).
Thickness measurement: thickness (without back) is measured as the average of four measurements taken at the ends of two straight segments passing through the cork centre in the tangential and axial directions. Irregularly thick zones shall not exceed 10% of total area.
Grades by thickness (d in mm):
- Extra thin: 14 < d ≤ 22 (sub‑grades 14–18 and 18–22)
- Thin: 22 < d ≤ 27
- Pint: 27 < d ≤ 32
- Quart: 32 < d ≤ 40
- Thick: 40 < d ≤ 54 (sub‑grades 40–45 and 45–54)
- Extra thick: d > 54
- Note: grouping 27

ISO 1216:2017 PDF

Технические детали

Abstract

Overview - ISO 1216:2017 (Boiled reproduction cork)

Key topics and technical requirements

Похожие стандарты

Abstract

Overview - ISO 1216:2017 (Boiled reproduction cork)

Key topics and technical requirements

Похожие стандарты

Document management. Monitoring and verification of information stored on 130mm optical media.

Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings a…

Refractory products — Measurement of dimensions and external defects of refractory bricks — Part 1: Dimension…

Information technology — Telecommunications and information exchange between systems — Near Field Communicati…

Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles

Information and documentation — International standard serial number (ISSN)

Water quality — General guidance on the enumeration of micro-organisms by culture

Alpine ski-bindings — Lateral release under impact loading — Test method