ISO 11126-1:2018 PDF

Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification

Первая страница стандарта ISO 11126-1:2018

Открыть превью (PDF)

Название (английский):

ISO 11126-1:2018

Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 1: General introduction and classification

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 6
Дата публикации:: 24 августа 2018 г.
Издание:: ISO IS 11126 edition 2 version 1
ICS:: 25.220.10

Язык документа:

ruen

Срок поставки:1 раб. дн. (перевод)

Цена:90 €

Описание (английский):

This document describes a classification of non-metallic blast-cleaning abrasives for the preparation of steel substrates before application of paints and related products. It specifies the characteristics which are required for the complete designation of such abrasives. This document applies to abrasives supplied in the "new" or unused condition only. It does not apply to abrasives either during or after use. NOTE Although this document has been developed specifically to meet requirements for preparation of steelwork, the properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques. These techniques are described in ISO 8504‑2.

Технические детали

Технический комитет: ISO/TC 35/SC 12 - Preparation of steel substrates before application of paints and related products
SKU: ISO 11126-1:2018

Abstract

Overview

ISO 11126-1:2018 - Preparation of steel substrates before application of paints and related products - Part 1 provides a general introduction and classification of non-metallic blast-cleaning abrasives. It defines how new (unused) non‑metallic abrasives are identified, classified and designated for use in abrasive blast‑cleaning of steel substrates. The standard is primarily focused on abrasion type, initial particle shape and particle size ranges, and it specifies the complete product designation and marking required for orders and delivery.

Key Topics

Abrasive classification: Abrasives are classified by material, origin or manufacture with standardized abbreviations (e.g., olivine N/OL, almandite garnet N/GA, coal furnace slag N/CS, fused aluminium oxide N/FA).
Initial particle shape: Two basic symbols are used - S for shot (round) and G for grit (angular/irregular). Only the initial particle shape as supplied is specified.
Particle size ranges: Mixtures of particle sizes are classified into size ranges; the size range (in millimetres) forms part of the product designation.
Designation and marking: Full product designation uses the format "Abrasive ISO 11126" + type abbreviation + "/" + particle-shape symbol + size range. Example: Abrasive ISO 11126 N/CS/G 0,2-0,5
Scope limits: Applies only to abrasives supplied in the new/unused condition - it does not cover abrasives during or after use.
Safety note: The standard warns that equipment, materials and abrasives can be hazardous and requires adequate instructions and precautions.

Applications

ISO 11126-1:2018 is used by professionals involved with surface preparation and coating systems:

Coating specifiers and engineering consultants selecting appropriate abrasives for steelwork.
Surface-preparation contractors and blast‑cleaning operators ensuring supplied abrasives meet specified designations.
Abrasive manufacturers and suppliers labeling and marking products to ISO designation requirements.
Quality assurance / inspection teams verifying delivered abrasives match project requirements.
Useful where consistent surface profile and cleanliness are required prior to painting, bonding or other protective treatments. Although developed for steel, the characteristics are generally applicable to preparing other substrates using blast‑cleaning techniques (see ISO 8504‑2).

Related standards

ISO 11126 (other parts) - specifications for specific non‑metallic abrasives (e.g., copper refinery slag, coal furnace slag, nickel slag, fused aluminium oxide, olivine, staurolite, almandite garnet)
ISO 11127 (test methods for non‑metallic abrasives)
ISO 11124 / ISO 11125 (metallic abrasives and test methods)
ISO 8503‑2 (surface profile comparators) and ISO 8504‑2 (abrasive blast‑cleaning techniques)

Keywords: ISO 11126-1:2018, non‑metallic blast‑cleaning abrasives, preparation of steel substrates, abrasive classification, particle shape, particle size, abrasive designation, surface profile.

Overview

Key Topics

Abrasive classification: Abrasives are classified by material, origin or manufacture with standardized abbreviations (e.g., olivine N/OL, almandite garnet N/GA, coal furnace slag N/CS, fused aluminium oxide N/FA).
Initial particle shape: Two basic symbols are used - S for shot (round) and G for grit (angular/irregular). Only the initial particle shape as supplied is specified.
Particle size ranges: Mixtures of particle sizes are classified into size ranges; the size range (in millimetres) forms part of the product designation.
Designation and marking: Full product designation uses the format "Abrasive ISO 11126" + type abbreviation + "/" + particle-shape symbol + size range. Example: Abrasive ISO 11126 N/CS/G 0,2-0,5
Scope limits: Applies only to abrasives supplied in the new/unused condition - it does not cover abrasives during or after use.
Safety note: The standard warns that equipment, materials and abrasives can be hazardous and requires adequate instructions and precautions.

Applications

ISO 11126-1:2018 is used by professionals involved with surface preparation and coating systems:

Coating specifiers and engineering consultants selecting appropriate abrasives for steelwork.
Surface-preparation contractors and blast‑cleaning operators ensuring supplied abrasives meet specified designations.
Abrasive manufacturers and suppliers labeling and marking products to ISO designation requirements.
Quality assurance / inspection teams verifying delivered abrasives match project requirements.
Useful where consistent surface profile and cleanliness are required prior to painting, bonding or other protective treatments. Although developed for steel, the characteristics are generally applicable to preparing other substrates using blast‑cleaning techniques (see ISO 8504‑2).

Related standards

ISO 11126 (other parts) - specifications for specific non‑metallic abrasives (e.g., copper refinery slag, coal furnace slag, nickel slag, fused aluminium oxide, olivine, staurolite, almandite garnet)
ISO 11127 (test methods for non‑metallic abrasives)
ISO 11124 / ISO 11125 (metallic abrasives and test methods)
ISO 8503‑2 (surface profile comparators) and ISO 8504‑2 (abrasive blast‑cleaning techniques)

Keywords: ISO 11126-1:2018, non‑metallic blast‑cleaning abrasives, preparation of steel substrates, abrasive classification, particle shape, particle size, abrasive designation, surface profile.

ISO 11126-1:2018 PDF

Технические детали

Abstract

Overview

Key Topics

Applications

Related standards

Похожие стандарты

Abstract

Overview

Key Topics

Applications

Related standards

Похожие стандарты

Preparation of steel substrates before application of paints and related products. Specifications for non-met…

Preparation of steel substrates before application of paints and related products. Surface preparation method…

Preparation of steel substrates before application of paints and related products. Test methods for non-metal…

Preparation of steel substrates before application of paints and related products. Specifications for metalli…

Preparation of steel substrates before application of paints and related products — Test methods for metallic…

Preparation of steel substrates before application of paints and related products — Surface roughness charact…