IEC 61754-7-2:2017 PDF

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows

Первая страница стандарта IEC 61754-7-2:2017

Открыть превью (PDF)

Название (английский):

IEC 61754-7-2:2017

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-2: Type MPO connector family - Two fibre rows

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 36
Дата публикации:: 13 декабря 2017 г.
Издание:: IEC IS 61754 edition 1 version 1
ICS:: 17.140.50

Язык документа:

ruen

Срок поставки:6 раб. дн. (перевод)

Цена:540 €

Описание (английский):

IEC 61754-7-2:2017 defines the standard interface dimensions for the type MPO family of connectors with two rows of fibres. This first edition of IEC 61754-7-2, along with the first edition of IEC 61754-7-1, cancels and replaces the third edition of IEC 61754-7 published in 2008. This first edition of IEC 61754-7-2 includes the two fibre row MPO variants including the addition of active device receptacles and up-angled plugs. The first edition of IEC 61754-7-1 includes the one fibre row MPO variants and related active device receptacles and up-angled plugs. Keywords: interface dimensions for the type MPO family of connectors with two rows of fibres

Технические детали

Технический комитет: SC 86B - Fibre optic interconnecting devices and passive components
SKU: IEC 61754-7-2:2017

Abstract

Overview

IEC 61754-7-2:2017 specifies the interface dimensions for the type MPO family of connectors with two rows of fibres. This first edition defines standardized mechanical interfaces for MPO connectors carrying 16–24 fibres arranged in two rows. It updates and splits the previous IEC 61754-7 (2008) into two parts (61754-7-1 for one-row variants and 61754-7-2 for two-row variants) and adds support for active device receptacles and up-angled plugs.

Key topics and technical requirements

Standard interface dimensions for the MPO two-row family, enabling consistent mating across manufacturers.
Connector geometry: the parent MPO ferrule is typically 6.4 mm × 2.5 mm and uses two 0.7 mm alignment pins.
Fibre counts and arrangement: supports arrays of 16 to 24 fibres in a two-layer (two-row) configuration.
Connector types covered:
- MPO female plug (without pins) and MPO male plug (with fixed pins)
- Angled interfaces: down-angled and up-angled plugs
- Flat interfaces
- Adaptors with opposed or aligned keyway configurations
- Backplane and printed circuit board housings
- Active device receptacles (angled and flat interfaces)
Mechanical features and mating:
- Push–pull coupling mechanism and ferrule spring loaded toward the optical axis
- Single male key to orient and limit relative mating position
- Defined intermateability rules: which plug types and adaptor/key configurations can mate (opposed vs aligned keyways determine compatible up/down or mixed angled plugs)
Documentation includes detailed figures, gauge definitions and dimensional tables to support design and conformity assessment.
Note on intellectual property: the standard flags potential patent claims related to MPO connectors and lists known contacts; implementers should review patent information.

Practical applications and users

IEC 61754-7-2 is used by:

Connector and cable manufacturers designing compliant MPO plugs, adaptors, housings and active-device receptacles
Data center architects and system integrators specifying high-density MPO deployments for 40/100 G and parallel optics
Equipment designers creating backplane/PCB receptacles and optical transceiver modules
Test labs and quality teams verifying intermateability and dimensional conformance
Standards and procurement teams ensuring cross-vendor compatibility for multi-fibre MPO links

Adopting IEC 61754-7-2 ensures reliable mechanical mating, predictable alignment, and interoperability for two-row MPO assemblies.

Related standards

IEC 61754-7-1 (one fibre row MPO variants and related receptacles)
Other parts of the IEC 61754 series covering fibre optic connector interfaces

Keywords: interface dimensions for the type MPO family of connectors with two rows of fibres, MPO two-row interface, MPO connector dimensions, MPO intermateability.

Overview

Key topics and technical requirements

Standard interface dimensions for the MPO two-row family, enabling consistent mating across manufacturers.
Connector geometry: the parent MPO ferrule is typically 6.4 mm × 2.5 mm and uses two 0.7 mm alignment pins.
Fibre counts and arrangement: supports arrays of 16 to 24 fibres in a two-layer (two-row) configuration.
Connector types covered:
- MPO female plug (without pins) and MPO male plug (with fixed pins)
- Angled interfaces: down-angled and up-angled plugs
- Flat interfaces
- Adaptors with opposed or aligned keyway configurations
- Backplane and printed circuit board housings
- Active device receptacles (angled and flat interfaces)
Mechanical features and mating:
- Push–pull coupling mechanism and ferrule spring loaded toward the optical axis
- Single male key to orient and limit relative mating position
- Defined intermateability rules: which plug types and adaptor/key configurations can mate (opposed vs aligned keyways determine compatible up/down or mixed angled plugs)
Documentation includes detailed figures, gauge definitions and dimensional tables to support design and conformity assessment.
Note on intellectual property: the standard flags potential patent claims related to MPO connectors and lists known contacts; implementers should review patent information.

Practical applications and users

IEC 61754-7-2 is used by:

Connector and cable manufacturers designing compliant MPO plugs, adaptors, housings and active-device receptacles
Data center architects and system integrators specifying high-density MPO deployments for 40/100 G and parallel optics
Equipment designers creating backplane/PCB receptacles and optical transceiver modules
Test labs and quality teams verifying intermateability and dimensional conformance
Standards and procurement teams ensuring cross-vendor compatibility for multi-fibre MPO links

Adopting IEC 61754-7-2 ensures reliable mechanical mating, predictable alignment, and interoperability for two-row MPO assemblies.

Related standards

IEC 61754-7-1 (one fibre row MPO variants and related receptacles)
Other parts of the IEC 61754 series covering fibre optic connector interfaces

Keywords: interface dimensions for the type MPO family of connectors with two rows of fibres, MPO two-row interface, MPO connector dimensions, MPO intermateability.

IEC 61754-7-2:2017 PDF

Технические детали

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Похожие стандарты

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Похожие стандарты

Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces - Type MPO conne…

Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Typ…

Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces - Type LSHE conn…