Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
Commissioning of electrical, instrumentation and control systems in the process industry. Specific phases and milestones
Сайт использует cookie и счётчики посещений для работы и статистики. Политика конфиденциальности
1 Scope This International Standard defines specific phases and milestones (see Figure 1) in the commissioning of electrical, instrumentation and control systems in the process industry . By way of example, it describes activities following the “completion-of-erection” milestone of the project and prior to the “acceptance-of-the-plant” phase by the owner . Such activities need to be adapted for each type of process/plant concerned.
NOTE This standard assumes that the “acceptance-of-the-plant” milestone will occur after the performance test . If there is a reduced scope, this document should be adapted accordingly.
Figure 1 — Definition of phases and milestones
NOTE Construction and precommissioning activities could be overlapping.
For application in the pharmaceutical or other highly specialized industries, additional guidelines (for example, Good Automated Manufacturing Practice (GAMP)), definitions and stipulations should apply in accordance with existing standards, for example, for GMP Compliance 21 CFR (FDA) and the Standard Operating Procedure of the European Medicines Agency (SOP/INSP/2003).
Другие стандарты BS
