Сайт использует cookie и счётчики посещений для работы и статистики. Политика конфиденциальности
Найдено: 60+
1 Scope This document specifies optical and non-optical requirements and the test methods for anti-reflective and hydrophobic properties of coatings on spectacle lenses. This document does not apply…
1 Scope ISO 80000‑5 gives names, symbols and definitions for quantities and units of thermodynamics. Where appropriate, conversion factors are also given.
1 Scope This document specifies requirements and verification methods for the optical and geometrical properties for uncut finished single-vision and multifocal spectacle lenses.
1 Scope This International Standard specifies certain characteristics of the oil of bergamot petitgrain [ Citrus bergamia (Risso et Poit.)], in order to facilitate assessment of its quality.
1 Scope This part of ISO 8118 defines the basic term and gives the nomenclature, technical specifications and designation for full-width weaving machine temples used in the textile industry.
1 Scope This document establishes rules for structuring of systems and the formulation of reference designations and provides classes for systems in the field of construction works and building servi…
1 Scope This document defines terms used in the hose industry. Recommended terminology for electrical conductivity and resistance of rubber and plastics hoses and hose assemblies can be found in ISO…
1 Scope This part of ISO 12151 specifies the general and dimensional requirements for the design and performance of hose fittings with 24° cone connector ends with O-rings, in accordance with ISO 843…
1 Scope This document defines terms relating to corrosion that are widely used in modern science and technology. In addition, some definitions are supplemented with short explanations. Throughout the…
1 Scope This document specifies the requirements for the quality identifiers that form part of an exchange of master data. These requirements supplement those of ISO 8000-110. The following are withi…
1 Scope This document defines general terms relating to temperature in fluid systems used in aerospace construction.
1 Scope This part of ISO 8230 specifies safety requirements for dry-cleaning machines that use a combustible solvent (CS), as defined in ISO 8230-1, as their cleaning medium. It is applicable to such…
What is ISO 8968-4- Determination of protein nitrogen content in milk and milk products about? ISO 8968 is an international standard that discusses the d etermination of nitrogen content in milk and…
1 Scope This International Standard specifies certain characteristics of the essential oil of lavandin Grosso [ Lavandula angustifolia Mill. × Lavandula latifolia Medik.], French type, intended for f…
1 Scope This International Standard specifies pressure impulse and burst test procedures for determining and classifying the impulse fatigue strengths of bent tubes used in aerospace hydraulic system…
What is ISO 80601 ‑ 2 ‑ 70 about? ISO 80601 discusses medical electrical equipment. ISO 80601-2-70 outlines the basic safety and essential performance of sleep apnoea breathing therapy equipment here…
1 Scope WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this document. This document specifies requirements for the blood circuit fo…
1 Scope This part of ISO 8434 specifies the general and dimensional requirements for the design and performance of O-ring face seal connectors made of steel for tube outside diameters or hose inside…
What is ISO 8600-5 - Optical resolution of rigid endoscopes with optics about? ISO 8600-5 describes procedures for determining the optical resolution of rigid endoscopes with optics. ISO 8600-5 appli…
1 Scope This International Standard specifies a method for the determination of creep in vulcanized rubber continuously subjected to compressive or to shear forces. The standard cannot be used for in…
1 Scope This part of ISO 8503 specifies the optical microscope and describes the procedure for calibrating ISO surface profile comparators conforming to the requirements of ISO 8503-1. This part of I…
1 Scope This part of ISO 8370 specifies a dynamic method of determining the location of the pitch zone of a Vribbed-belt, which is expressed as an effective line differential b e (see figure 1). NOTE…
BS EN ISO 8835-4:2009 Inhalational anaesthesia systems. Anaesthetic vapour delivery devices BS EN ISO 8835 consists of the following parts, under the general title Inhalational anaesthesia systems: P…
What is this standard about? This document specifies requirements and gives guidance for performing the manipulations common to each culture technique for the microbiological examination of water, pa…
1 * Scope This part of ISO 80369 specifies requirements for small-bore connectors intended to be used for connections in neuraxial applications . Neuraxial applications involve the use of medical dev…
1 Scope This International Standard specifies a method for the determination of the tensile properties of sealants used in joints in building construction. NOTE A method for the determination of tens…
1 Scope This document specifies a method for determining the resilience by ball rebound of flexible cellular polymeric materials.
1 Scope This part of ISO 8829 specifies test methods for flexible polytetrafluoroethylene (PTFE) inner tubes with metallic (stainless steel) braided hose and hose assemblies used in aircraft fluid sy…
1 Scope This document specifies general requirements for steel spring wire of round cross-section, suitable for the manufacture of mechanical springs.
1 Scope This part of ISO 8178, together with ISO 8178-1 and ISO 8178-11, specifies the measurement and evaluation methods for gaseous and particulate exhaust emissions from reciprocating internal com…
1 Scope This document specifies minimum requirements for the training of advanced scientific divers to undertake advanced scientific diving . This document specifies evaluation criteria for these com…
1 Scope This International Standard specifies a method for assessing small volumes of material in the cargo tanks of marine tanker vessels prior to loading ( OBQ ) or upon completion of discharge ( R…
1 Scope This document defines core terms in the field of nanotechnology . This document is intended to facilitate communication between organizations and individuals in industry and those who interac…
1 Scope This International Standard specifies a method for the determination of the adhesive strength of a vulcanized or thermoplastic rubber bonded to a rigid substrate, using a test piece comprisin…
What is ISO 8529-3- Calibration of the area and personal dosimeters for neutron radiation about? ISO 8529 is an international standard on reference neutron radiations that discusses the calibration o…
1 Scope This International Standard specifies requirements for lightweight polytetrafluoroethylene (PTFE) hose assemblies for use in aircraft hydraulic systems at temperatures between − 55 °C and 204…
1 Scope The metabolic rate, as a conversion of chemical into mechanical and thermal energy, measures the energetic cost of muscular load and gives a numerical index of activity. Metabolic rate is an…
201.1 Scope, object and related standards IEC 60601‑1:2005+AMD1:2012, Clause 1, applies, except as follows: 201.1.1 * Scope Replacement: This document applies to the basic safety and essential perfor…
1 Scope This part of this Standard specifies material, performance requirements and test methods for table cutlery (knives, forks, spoons, carving sets, ladles, children’s cutlery and other serving p…
1 Scope This International Standard specifies a method for the determination of loss of mass on heating of aluminium oxide at 300 °C and further loss of mass on ignition at 1 000 °C. By industry conv…
1 Scope This part of ISO 8820 defines terms and specifies general test requirements for fuse -links for electrical DC systems of road vehicles. This part of ISO 8820 is intended to be used in conjunc…
What is ISO 8000 ‑ 66 about? ISO 8000 ‑ 66 discusses data quality management. ISO 8000 ‑ 66 specifies assessment indicators to support the assessment of organizational process maturity for data quali…
1 Scope This part of ISO 8600 specifies requirements for rigid bronchoscopes and their endoscopic accessories used in the practice of anaesthesia and medical endoscopy.
What is ISO 8102-1 about? ISO 8102 discusses electrical requirements for lifts, escalators and moving walks. ISO 8102-1 is the first part of the ISO 8102 multi-series, and discusses electromagnetic c…
