Сайт использует cookie и счётчики посещений для работы и статистики. Политика конфиденциальности
Найдено: 60+
1 Scope This part of ISO 7876 establishes a vocabulary for high-pressure pipes and end-connections in fuel injection systems for diesel (compression-ignition) engines. These high-pressure pipes and e…
1 Scope This part of ISO 7870 presents key elements and philosophy of the control chart approach, and identifies a wide variety of control charts (including those related to the Shewhart control char…
1 Scope This International Standard covers EWMA control charts as a statistical process control technique to detect small shifts in the process mean. It makes possible the faster detection of small t…
1 Scope and field of application This part of ISO 787 specifies a general method of test for comparing the heat stability of the pigment under test against that of an agreed sample. NOTE — When this…
What is ISO 787- 11 - Tamped volume and density of pigments and extenders about? ISO 787- 11 discusses pigments and extenders. The aim of the ISO 787 series is to provide best industry practices for…
1 Scope This part of ISO 7870 provides statistical procedures for setting up cumulative sum (cusum) schemes for process and quality control using variables (measured) and attribute data. It describes…
Overview ISO 7870-2:2023 - “Control charts - Part 2: Shewhart control charts” is an international standard that provides a clear, practical guide to using Shewhart control charts for Statistical Proc…
Overview ISO 7879:1997 - "Diesel engines - Cradle-mounted in-line fuel injection pumps - Mounting dimensions" is an international standard that defines the mounting dimensions and tolerances for crad…
Overview ISO 7870-9:2020 - "Control charts - Part 9: Control charts for stationary processes" provides guidance on constructing and applying statistical process control (SPC) charts when process data…
Overview ISO 787-5:2026 is an internationally recognized standard developed by the International Organization for Standardization (ISO) under the ISO 787 series. This document outlines general test m…
Overview ISO 7876-1:1990 - Fuel injection equipment - Vocabulary - Part 1: Fuel injection pumps defines a standardized vocabulary and definitions for fuel injection pumps used on compression‑ignition…
Overview ISO 7870-3:2020 - "Control charts - Part 3: Acceptance control charts" provides guidance for designing and using acceptance control charts to make process acceptance decisions. The standard…
Overview ISO 787-2:2021 defines a general, gravimetric test method for determining the mass fraction (percentage) of matter volatile at 105 °C in pigments and extenders. This method applies to materi…
Overview ISO 787-1:1982 - General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments - establishes a standardized procedure for visually comparing the colour of a c…
Overview ISO 7876-5:2021 - Fuel injection equipment - Vocabulary - Part 5: Common rail fuel injection system - is the ISO international vocabulary for common rail (CR) fuel injection systems used on…
1 Scope This part of ISO 787 specifies a general method of test for determining the residue on sieve from a sample of pigment or extender dispersed in water. ISO 787-18, General methods of test for p…
What is ISO 787-14- Pigments and extenders about? ISO 787 discusses pigments and extenders. ISO 78714 is the fourteenth part of the ISO 787 multi-series and discusses the determination of resistivity…
What is ISO 787-10 - Pigments and extenders about? ISO 787-10 discusses pigments and extenders. The aim of the ISO 787 series is to provide best industry practices for pigments and extenders that hel…
1 Scope This part of ISO 7870 establishes a guide to the use and understanding of specialized control charts in situations where commonly used Shewhart control chart approach to the methods of statis…
1 Scope This part of ISO 787 specifies a general method of test for determining the water-soluble sulfates, chlorides and nitrates of pigments. NOTE When this general method is applicable to a given…
What is ISO 787- 23 – Determine density using a centrifuge to remove entrained air of pigments and extenders about? ISO 787- 23 discusses pigments and extenders. The aim of the ISO 787 series is to p…
Overview ISO 7870-6:2016 - Control charts - Part 6: EWMA control charts defines the use of Exponentially Weighted Moving Average (EWMA) control charts as a statistical process control (SPC) technique…
Overview ISO 787-19:2020 specifies a general spectrophotometric method using salicylic acid to determine water-soluble nitrates in pigment samples. The method nitrates salicylic acid in a sulphuric a…
Overview ISO 7870-1:2019 - "Control charts - Part 1: General guidelines" - provides the conceptual framework and selection guidance for control charts used in Statistical Process Control (SPC). Rathe…
Overview ISO 787-5:1980 specifies a general test method for determining the oil absorption value of pigments and extenders. This standardized test measures the quantity of refined linseed oil absorbe…
Overview ISO 787-28:2019 specifies a laboratory method for the determination of total polychlorinated biphenyls (PCBs) in pigment materials. The procedure targets all 209 PCB congeners, using a disso…
Overview ISO 787-25:2019 specifies a colorimetric test method for comparing the colour, in full‑shade (optically hiding) systems, of white, black and coloured pigments against an agreed reference pig…
1 Scope This part of ISO 7870 gives guidance on the uses of acceptance control charts and establishes general procedures for determining sample sizes, action limits and decision criteria. An acceptan…
What is ISO 787 ‑ 13 - General methods of test for pigments and extenders about? ISO 787 ‑ 13 is part 13 of a multi-series of international standards on general methods of test for pigments and exten…
Overview ISO 7870-6:2024 specifies EWMA control charts (Exponentially Weighted Moving Average) for monitoring the process mean as part of statistical process control (SPC). The second edition replace…
Overview ISO 787-8:2000 defines a standardized laboratory method - the cold extraction method - for determining the percentage by mass of matter soluble in water in pigments and extenders. It is one…
Overview ISO 7870-7:2020 - Control charts - Part 7: Multivariate control charts specifies how to construct and use multivariate control charts within statistical process control (SPC). The standard p…
Overview SIST EN ISO 787-5:2026 specifies standardized general methods for determining the oil absorption value of pigments and extenders. This value indicates the amount of oil a pigment or extender…
Overview EN ISO 787-5:2026 specifies standardized general methods for determining the oil absorption value of pigments and extenders. This value indicates the amount of oil a pigment or extender abso…
Overview This page summarizes EN ISO 787-2:2021 - General methods of test for pigments and extenders, Part 2: Determination of matter volatile at 105 °C (ISO 787-2:2021). The standard specifies a lab…
Overview EN ISO 787-28:2020 (ISO 787-28:2019) specifies a laboratory method for the determination of total polychlorinated biphenyls (PCBs) in pigment and extender materials. The procedure uses disso…
Overview - EN ISO 787-19:2020 (Salicylic acid method) EN ISO 787-19:2020 specifies a spectrophotometric method for the determination of water‑soluble nitrates in pigment samples using the salicylic a…
Overview SIST ISO 7870-1:2020 - "Control charts - Part 1: General guidelines" - provides the conceptual framework and selection guidance for control charts used in Statistical Process Control (SPC).…
Overview EN ISO 787-13:2019 (ISO 787-13:2019) defines general laboratory test methods for the determination of water‑soluble sulphates, chlorides and nitrates in pigments and extenders. Published by…
Overview EN ISO 787-15:2019 - General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:2019) defines a reprodu…
