Сайт использует cookie и счётчики посещений для работы и статистики. Политика конфиденциальности
Найдено: 60+
1 Scope This part of ISO 6101 specifies an atomic absorption spectrometric method for the determination of the copper content of rubbers. The method is applicable to raw rubber and rubber products ha…
Section 1 General 1.1 Scope This part of ISO 6196 is intended to facilitate international communication in micrographics. It presents, in two languages, terms and definitions of selected concepts rel…
1 Scope This part of ISO 6194 establishes the appropriate vocabulary for seals utilizing elastomeric sealing elements where the terms and definitions given in ISO 5598 apply. These seals are consider…
1 Scope This document specifies an atomic absorption spectrometric method for the determination of the iron content of rubbers. The method is applicable to raw rubber, rubber products and latex havin…
1 Scope This International Standard specifies two methods, A and B, for determining the pourability of plastics in powdered and granular form by measuring the flow time through a funnel. From method…
Scope This part of ISO 6107 defines terms used in certain fields of water quality characterization. NOTE In addition to the terms and definitions in three of the official ISO languages (English, Fren…
1 Scope ISO 6145 comprises a series of International Standards dealing with various dynamic methods used for the preparation of calibration gas mixtures. This part of ISO 6145 describes a method and…
Scope This part of ISO 6107 defines terms used in certain fields of water quality characterization. NOTE In addition to the terms and definitions in the three official ISO languages (English, French…
1 Scope This document specifies an atomic absorption spectrometric method for the determination of the manganese content of rubbers. The method is applicable to raw rubber and rubber products having…
1 Scope This International Standard specifies performance tests of brake cups and seals for hydraulic braking systems for road vehicles. It does not include requirements relating to chemical composit…
1 Scope This document specifies dimensions and performance requirements for external hex and internal hex port plugs for use with ISO 6149‑1 ports. Port plugs in accordance with this document can be…
1 Scope This document specifies general requirements, analytical methods, sampling and preparation of test sample, marking and labelling, packaging, transport and storage for liquid methylene-urea sl…
1 Scope This International Standard specifies procedures that enable a camera operator to produce microfilm of appropriate quality of presentation and legibility, capable of yielding scanned images o…
Overview ISO 6195:2021 specifies the dimensions and tolerances for housings that accept wiper‑rings used on reciprocating cylinder rods in fluid power systems. It covers rod diameters from 4 mm to 45…
Overview ISO 6145-8:2005 - "Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method" defines a dynamic diffusion technique for producing ver…
Overview ISO 6194-4:2009 - "Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4: Performance test procedures" specifies general test methods for qualifying rotary shaft li…
Overview ISO 6157-3:1988 - Fasteners: Surface discontinuities - Part 3 covers acceptance limits, inspection and sampling for surface discontinuities specifically in bolts, screws and studs for specia…
Overview ISO 6162-1:2012 - Hydraulic fluid power - Flange connections with split or one-piece flange clamps and metric or inch screws - Part 1 defines general and dimensional specifications for flang…
BS EN ISO 6145-1:2008 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Methods of calibration BS EN ISO 6145-1 specifies the calibration methods involved in the…
What is ISO 6150 - Pneumatic fluid power about? ISO 6150 discusses pneumatic fluid power. A pneumatic power system carries power by employing compressed gas, generally air, as a fluid for transmittin…
1 Scope This part of ISO 6162 gives general and dimensional specifications for flanged heads, split flange clamps (FCS and FCSM), one-piece flange clamps (FC and FCM), ports and mounting surfaces app…
Overview ISO 6145-10:2002 - "Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method" specifies a dynamic permeation technique for prepari…
1 Scope This document specifies a method for the dynamic preparation of calibration gas mixtures containing at least two gases (usually one of them is a complementary gas) from pure gases or gas pre-…
Overview ISO 6185-1:2001 is the international standard that sets minimum safety, design and testing requirements for inflatable boats - including rigid inflatable boats - with a maximum motor power r…
Overview ISO 6149-4:2017 - Connections for fluid power and general use - Part 4 specifies dimensions, design, test methods and requirements for external hex and internal hex port plugs used with ISO…
Overview ISO 12151-3:2021 is an international standard developed by ISO that specifies the general and dimensional requirements for carbon steel hose fittings with ISO 6162-1 or ISO 6162-2 flange end…
Overview ISO 6149-1:2022 specifies metric ports with truncated housings for O‑ring sealing used in hydraulic fluid power and general-purpose applications. The standard defines port dimensions, identi…
Overview ISO 6133:2015 - "Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength" - defines standardized methods for post-test analysis…
Overview ISO 12151-4:2007 establishes the general and dimensional requirements for hose fittings with ISO 6149 metric stud ends intended for hydraulic fluid power and general use. It covers carbon-st…
Overview - ISO 6182-6:2020 (check valves for automatic sprinkler systems) ISO 6182-6:2020 is the international standard that specifies performance, requirements, test methods and marking for check va…
Overview - ISO 6149-3:2006 (stud ends, L series) ISO 6149-3:2006 specifies the dimensions, design, test methods and requirements for light‑duty (L series) stud ends and matching O‑rings used in hydra…
Overview ISO 6182-8:2019 - Fire protection - Automatic sprinkler systems - Part 8 specifies performance requirements, test methods and marking for pre-action dry alarm valves, valve sets and manufact…
Overview ISO 6128:2023 specifies requirements and test methods for laminated products made of bamboo strips intended for indoor furniture. The standard covers appearance, dimensional and physical/mec…
Overview ISO 6199:2005 - Micrographics - Microfilming of documents on 16 mm and 35 mm silver‑gelatin type microfilm - Operating procedures defines practical, camera‑operator level procedures to produ…
Overview ISO 6183:2022 - "Fire protection equipment - Carbon dioxide extinguishing systems for use on premises - Design and installation" - defines requirements and gives recommendations for the desi…
Overview ISO 6184-2:1985, "Explosion protection systems - Part 2: Determination of explosion indices of combustible gases in air," specifies a reference test method for measuring the explosion indice…
Overview ISO 61:2023 is an internationally recognized standard published by ISO that specifies a precise method for determining the apparent density of plastics moulding materials that cannot be pour…
Overview ISO 6140:1991 - Aluminium ores - Preparation of samples is an international standard developed by ISO that specifies procedures for the treatment and preparation of gross samples and subsamp…
Overview ISO 6194-5:2008 specifies criteria for identifying and classifying visual imperfections in rotary-shaft lip-type seals that incorporate elastomeric sealing elements. These seals are primaril…
